keepthedate2.jpgThis little cutie was made using ScrapBooking Fanatics Nov. kit. I added the base scrap chipboard, magnets, brads (I had already used the small kit ones…lol), dymo labels and a printed calendar template from Maya Road. I resized the calendars to fit this project. After each month is done I can simply tear it off and throw it away!! Finished size is 4×7 inches.
Note: I would suggest changing all dimensions and printing the calendar larger, say at 4×4 inches, if you have problems seeing small numbers.

Instructions:
1-Cut three thin pieces of scrap chipboard to 4×7 inches and glue together (this is the thinner stuff you get with scrap supply orders..we all usually have tons of it…..works great this way) Cover it with paper #1.
2-Cut paper #2 to 3.5×6.5 inches, glue on top of paper #1. Outline paper #2 with a black marker. Download the calendar template and resize them to 2.75×2.75 inches, print and cut out. Line up the calendar sheets in order , mat with a 3×3 inch piece of black cardstock and staple them to the mat. Then attach mat as shown. 
3-Cut a scrap piece of paper, paper #3, to fit upper area as shown (like the polka dot paper, it is 3″ wide by? , not sure of that measurement..lol) ink it around the edges and attach it.
Mark your holes for the label holders with a pen and then, using a pad and pushpin, poke the holes and rotate the pin to widen the hole a bit. Attach label holders using small brads.
4-Print your labels for the title and insert. (I used a hand held battery operated dymo labeller and left the backing on so they are not sticky).
5-Take the scallop tag off the sticker sheet included with the Nov. kit, fold in half, staple and then adhere to right side of calendar as shown.
6-Adhere magnets to the back and display on your fridge.